| Material | |
|---|---|
| Length | |
| Finish | |
| Hole Diameter |
0.166 +.003in (.08mm)/-.000 |
| Min Material Thickness |
0.04 |
| Min Dist to Edge |
0.23 |
| Clearence for Screw Size |
#4 (.114) |
| Barrel Outer Diameter |
0.165 |
| Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Casters
- Catches and Latches
- Closeout Hardware
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Blind Standoffs
- Blind Standoffs for Stainless Steel Sheets
- Grounding Standoffs
- Hex Threaded Standoffs
- Male / Female Standoffs
- Round Threaded Standoffs
- Spring Top Standoffs for Metal
- Standoffs for Thin Material
- Thru-Hole Standoffs for Stainless Steel
- Thru-Hole Threaded Standoffs
- Unthreaded Thru-Hole Standoffs
- #10 (.192) Unthreaded Thru-Hole Standoffs
- #4 (.114) Unthreaded Thru-Hole Standoffs
- #6 (.140) Unthreaded Thru-Hole Standoffs
- #8 (.166) Unthreaded Thru-Hole Standoffs
- M3 Unthreaded Thru-Hole Standoffs
- M3.5 Unthreaded Thru-Hole Standoffs
- M4 Unthreaded Thru-Hole Standoffs
- M5 Unthreaded Thru-Hole Standoffs
- Self-Clinching Nuts
- Self-Clinching Panel Fasteners
- Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter
