| Thread | |
|---|---|
| Material | |
| Length | |
| Finish | |
| Hole Diameter |
0.085 +.003in (.08mm)/-.000 |
| Min Material Thickness |
0.048 |
| Min Dist to Edge |
0.098 |
| Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Abrasives
- Casters
- Catches and Latches
- Closeout Hardware
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Safety
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Self-Clinching Nuts
- Self-Clinching Panel Fasteners
- Broaching Fasteners
- Self-Clinching Studs
- Close To The Edge Studs
- Stainless 10-32 Close To The Edge Studs
- Stainless 2-56 Close To The Edge Studs
- Stainless 4-40 Close To The Edge Studs
- Stainless 6-32 Close To The Edge Studs
- Stainless 8-32 Close To The Edge Studs
- Stainless M2.5 x 0.45 Close To The Edge Studs
- Stainless M3 x 0.50 Close To The Edge Studs
- Stainless M3.5 x 0.60 Close To The Edge Studs
- Stainless M4 x 0.70 Close To The Edge Studs
- Stainless M5 x 0.80 Close To The Edge Studs
- Steel 10-32 Close To The Edge Studs
- Steel 2-56 Close To The Edge Studs
- Steel 4-40 Close To The Edge Studs
- Steel 6-32 Close To The Edge Studs
- Steel 8-32 Close To The Edge Studs
- Steel M2.5 x 0.45 Close To The Edge Studs
- Steel M3 x 0.50 Close To The Edge Studs
- Steel M3.5 x 0.60 Close To The Edge Studs
- Steel M4 x 0.70 Close To The Edge Studs
- Steel M5 x 0.80 Close To The Edge Studs
- Flush Head Studs
- High-Torque Studs
- Large Head High-Torque Studs
- Studs for Thin Material
- Close To The Edge Studs
- Slotted Panel Fasteners
- Slotted, Low Profile Panel Fasteners
- Spring Loaded Plunger
- Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter
