| Thread | |
|---|---|
| Material | |
| Length | |
| Finish | |
| Hole Diameter |
0.213 +.003in (.08mm)/-.000 |
| Min Material Thickness |
0.06 |
| Min Dist to Edge |
0.22 |
| Barrel Outer Diameter |
0.281 |
| Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Abrasives
- Casters
- Catches and Latches
- Closeout Hardware
- D-rings
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Safety
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Self-Clinching Nuts
- Self-Clinching Panel Fasteners
- Broaching Fasteners
- Nuts for PC Boards
- Studs for PC Boards
- Threaded Standoffs for PC Boards
- Brass 4-40 Flare Mounted Threaded Standoffs for PC Boards
- Brass 6-32 Flare Mounted Threaded Standoffs for PC Boards
- Brass M3 x 0.50 Flare Mounted Threaded Standoffs for PC Boards
- Brass M4 x 0.70 Flare Mounted Threaded Standoffs for PC Boards
- Stainless 4-40 Threaded Standoffs for PC Boards
- Stainless 6-32 Threaded Standoffs for PC Boards
- Stainless M3 x 0.50 Threaded Standoffs for PC Boards
- Steel 4-40 Threaded Standoffs for PC Boards
- Steel 6-32 Threaded Standoffs for PC Boards
- Steel M3 x 0.50 Threaded Standoffs for PC Boards
- Unthreaded Standoffs for PC Boards
- Self-Clinching Studs
- Slotted Panel Fasteners
- Slotted, Low Profile Panel Fasteners
- Spring Loaded Plunger
- Broaching Fasteners
- Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter
