| Thread | |
|---|---|
| Material | |
| Length | |
| Finish | |
| Hole Diameter |
7.92 +.003in (.08mm)/-.000 |
| Min Material Thickness |
1 |
| Min Dist to Edge |
5.6 |
| Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Abrasives
- Casters
- Catches and Latches
- Closeout Hardware
- D-rings
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Safety
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Self-Clinching Nuts
- All Metal Lock Nuts
- Blind Self-Clinching Press Nuts
- Floating Nuts
- Floating, Slef-Locking Nuts
- Flush Nuts
- Hardened Nuts for Stainless Steel
- Miniature Nuts
- Miniature Self-Locking Nuts
- Self-Clinching, Self-Locking Nuts
- 10-32 Self-Clinching, Self-Locking Fasteners
- 4-40 Self-Clinching, Self-Locking Fasteners
- 6-32 Self-Clinching, Self-Locking Fasteners
- 8-32 Self-Clinching, Self-Locking Fasteners
- M3 x 0.50 Self-Clinching, Self-Locking Fasteners
- M4 x 0.70 Self-Clinching, Self-Locking Fasteners
- M5 x 0.80 Self-Clinching, Self-Locking Fasteners
- Standard Nuts
- Self-Clinching Panel Fasteners
- Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter
