Thread | |
---|---|
Material | |
Length | |
Finish | |
Hole Diameter |
0.197 +.003in (.08mm)/-.000 |
Min Material Thickness |
0.04 |
Min Dist Hole C L to Edge |
0.28 |
Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Abrasives
- Casters
- Catches and Latches
- Closeout Hardware
- D-rings
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Safety
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Self-Clinching Nuts
- Self-Clinching Panel Fasteners
- Self-Clinching Pins
- Flush Head Self-Clinching Pins
- 0.073 Flush Head Self-Clinching Pins
- 0.084 Flush Head Self-Clinching Pins
- 0.094 Flush Head Self-Clinching Pins
- 0.103 Flush Head Self-Clinching Pins
- 0.106 Flush Head Self-Clinching Pins
- 0.116 Flush Head Self-Clinching Pins
- 0.12 Flush Head Self-Clinching Pins
- 0.137 Flush Head Self-Clinching Pins
- 0.141 Flush Head Self-Clinching Pins
- 0.16 Flush Head Self-Clinching Pins
- 0.167 Flush Head Self-Clinching Pins
- 0.173 Flush Head Self-Clinching Pins
- 0.207 Flush Head Self-Clinching Pins
- 0.215 Flush Head Self-Clinching Pins
- 0.223 Flush Head Self-Clinching Pins
- 0.273 Flush Head Self-Clinching Pins
- 0.281 Flush Head Self-Clinching Pins
- Flush Head Tapered Pins
- Flush Head Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter