| Thread | |
|---|---|
| Material | |
| Length | |
| Finish | |
| Hole Diameter |
0.213 +.003in (.08mm)/-.000 |
| Min Material Thickness |
0.04 |
| Min Dist to Edge |
0.28 |
| Barrel Outer Diameter |
0.212 |
| Warning |
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Product categories
- Abrasives
- Casters
- Catches and Latches
- Closeout Hardware
- Door Checks
- Door Panel Locks and Latches
- Drawer Slides
- Gas Springs
- Handles
- Hinges
- Misc. Fasteners
- Misc. Hardware
- Paneloc Slam & Bolt Latches
- Rivet Nuts
- Rivets
- Safety
- Self Clinching Fasteners
- Hardened Nuts for SS Sheets
- Self Clinching Spacers
- Self Clinching Standoffs
- Blind Standoffs
- Blind Standoffs for Stainless Steel Sheets
- Grounding Standoffs
- Hex Threaded Standoffs
- Male / Female Standoffs
- Round Threaded Standoffs
- Spring Top Standoffs for Metal
- Standoffs for Thin Material
- Thru-Hole Standoffs for Stainless Steel
- 10-32 Thru-Hole Standoffs for Stainless Steel
- 4-40 Thru-Hole Standoffs for Stainless Steel
- 6-32 Thru-Hole Standoffs for Stainless Steel
- 8-32 Thru-Hole Standoffs for Stainless Steel
- M3 Thru-Hole Standoffs for Stainless Steel
- M3.5 Thru-Hole Standoffs for Stainless Steel
- M4 Thru-Hole Standoffs for Stainless Steel
- M5 Thru-Hole Standoffs for Stainless Steel
- Thru-Hole Threaded Standoffs
- Unthreaded Thru-Hole Standoffs
- Self-Clinching Nuts
- Self-Clinching Panel Fasteners
- Self-Clinching Pins
- Self-Clinching Studs
- Studs for Stainless Materials
- Tooling
- Weld Fasteners
MRO Hardware Newsletter
